Citronic

Notes: A durable, high quality shielded audio lead with pro quality, die-cast twin XLR connectors and 3.5mm balanced TRS jack plug, offering exceptional sound and reliability. Made with high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

Notes: A durable, high quality shielded audio lead with pro quality, die-cast twin XLR connectors and 3.5mm balanced TRS jack plug, offering exceptional sound and reliability. Made with high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

Cable : diameter: 6mm
Length: 1m
Connectors: 3.5mm Stereo to Stereo XLR

Notes: The Citronic compact laptop stand supports laptop computers, audio interfaces and other DJ equipment and allows for positioning above other equipment at a fixed 15 degree angle for easy viewing. It can be assembled in 5 different height settings and has high density foam pads on the support arms and lower skids to prevent damage and slipping

Notes: Fully featured audio mixer with 4 mono input channels, a stereo line input, stereo Aux input and a further minijack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Mid/Low EQ controls, Aux out level, FX level and Pan control. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Main output is served by left & right XLR, in addition to 6.3mm monitor and headphone outputs and the Aux send & stereo return loop. The CMB-series offers large console features in a more manageable format for live performers and project studio recordists.

DSP effect section with 99 adjustable presets
USB mp3 audio player/recorder
Bluetooth receiver with independent volume control
PC/Mac audio device and aux power via USB A connection
3-band EQ per channel
Independent Aux send + stereo return
Switchable +48V phantom power
Balanced XLR/Jack mono inputs
USB type-C power supply

Power supply: 5Vdc 2A min. (USB-C adaptor included)
Power consumption: max.10W
Effects: 99 program DSP (2 parameter controls)
Inputs: 4 x combo XLR/jack, stereo L+R 6.3mm, stereo RCA + stereo 3.5mm
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: 5.1 (+BR+EDR+BLE)
EQ: low+/-15dB @ 80Hz
EQ: mid+/-15dB @ 2.5kHz
EQ: high+/-15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (i1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm (unbal 20k Ohm)
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk>80dB (1kHz fader shutoff)
Outputs: Main L+R XLR, L+R Monitor 6.3mm, Headphones 6.3mm
Max. output level: XLR +22dBu, TRS +20dBu
Sends : returns1 Aux send, L+R return
Dimensions: 270 x 260 x 74mm
Weight: 1.495kg

In the Box

CMB-series mixing console
In-line USB-C power supply

Notes: Cheap and cheerful DJ headphones built to a familiar formula. Over-ear design with punchy sound, removable coiled cable and a handy carry case for protection. Good value.

Supplier's Notes:
Professional quality studio monitor headphones built specifically for all stages of the music production process. The cutting edge design provides excellent sound insulation and ensures a comfortable fit even during long recording and mixing sessions. Dynamic 40mm speaker drivers deliver pristine sound across the frequencies and excellent bass response for precise monitoring. Swivel and rotate ear cups offer the perfect angle for any application and the interchangeable twist and lock connection cable provides additional convenience.

Speaker: driver40mmO
Frequency response: 20Hz - 20KHz
Impedance: 32 Ohms
Connections: 3.5mm stereo mini jack, 6.3mm stereo jack adaptor
Lead length: 1.5m coiled, 3m extended
Weight: 242g (without cable)

The box for this item contains :

DJ Headphones
3.5mm Coiled cable 1.5m (3m extended)
6.3 mm stereo plug adapter (gold-plated, screw type)
Compact hardshell carry case

Notes: Compact format audio mixer with 2 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

Notes: Compact format audio mixer with 4 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

Notes: The CX23 is a 2-way stereo or 3-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the AMP driving the mid/top frequency cabs. This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.

Notes: A desktop stand to support a laptop computer or similar equipment to allow positioning above other equipment at a fixed 15- angle for easy viewing. Can be assembled and any of the 4 possible height settings and 3 of the possible width settings. The support arms and lower skids are covered in high density foam pads to prevent damage or slipping. Also includes a desk clamp option for attaching your laptop stand to a table, desk or shelf.

Notes: The PRO-2 MKII is a straightforward traditional 2-channel mixer with a solid build quality and an uncluttered layout. It has high quality faders, sturdy rotaries and includes a dedicated microphone input with 2-band EQ and level control. The monitor section features a rotary control to switch between channels 1 and 2 allowing the user to have a mix of both channels at the same time through the headphones.

Notes: A multi-functional mixer in a compact format for live or studio applications. Powered from the rear USB Type-C connection, this port also acts as a USB audio interface for direct recording and playback from a laptop without an additional power supply. 2 mono channels can accept an XLR input for microphone or 6.3mm plug for line or instrument (selectable) with switchable 48V phantom power for condenser microphones. These can be routed to the internal delay effect section for echo effects if desired. An additional stereo line channel can accept 6.3mm plugs or a single plug for mono operation. Each channel has a Gain control with Bass and Treble EQ controls. A USB type-A connector is provided for playback of mp3 files from a pen drive and the media player even has a built-in Bluetooth receiver for wireless playback from a smart phone or tablet. Outputs include main outs, recording and headphone connections. Comprehensive features make this a useful tool for live performance, project studios, laptop DJs and podcasting.

USB Type-C power supply and integrated audio interface
USB mp3/wma digital audio player
Bluetooth receiver for wireless audio streaming
Individually switchable +48V phantom power

Power supply: 5Vdc 2A (USB type-C adaptor included)
USB computer interface: Type-C (with power connection)
Audio source: USB audio player, Bluetooth receiver
Inputs: 2 x mono XLR/jack, Stereo L+R jack
Outputs: Main out L+R jack, Phones out stereo jack, REC out L+R RCA
Effects: Adjustable delay effect
Phantom power: +48V (switchable)
Dimensions: 182 x 160 x 50mm
Weight: 453g

In the Box

Q-PAD Mini Mixer
USB-C power adapter

Notes: Studio Microphone Kit

Studio microphone kit comprising a condenser microphone with shock mount, pop filter, pop shield, XLR lead and adjustable arm mount with clamp. Designed for use with mixing consoles or audio interfaces that have phantom power at the input. Delivers crisp and clear vocals and instrument recordings for project studios, online broadcasts and DAW based applications.

Phantom power: +48V required
Power source: Phantom power 5-48V required
Capsule: 26mmO back electret condenser
Polar pattern: Cardioid
Sensitivity: -38dB i 2dB @ 1kHz (0dB = 1V/Pa)
Impedance: 150 Ohms
S/N ratio: 78dB
SPL: max.132dB @ 1kHz (<1%THD)
Frequency response: 20Hz - 20kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 228g (microphone only)

In the box

The box for this item contains :

Studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
XLR F-M lead 2.5m

Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.

Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g

In the box

The box for this item contains:

USB2+1 Audio Interface
1.5m USB C to A lead

Notes: Complete recording kit comprising a USB condenser microphone with shock mount, pop filter, pop shield, USB type B to A lead and adjustable arm mount with clamp. Designed for use with either a PC or Mac computer running a digital recording software suite. The UMK-7 delivers clear vocal or instrument pickup to provide studio quality results from an affordable and uncluttered setup.

Power supply: 5Vdc (from USB)
Capsule16mm: O back electret condenser
Polar pattern: Cardioid
Sensitivity: -48dB +/-2dB @ 1kHz (0dB = 1V/Pa)
Output impedance: 150 Ohms
S/N ratio: 78dB
SPL max.132dB @ 1kHz: (<1%THD)
Frequency response: 30Hz - 18kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 206g (microphone only)

In the box

The box for this item contains :

USB studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
USB B to A lead 1.5m