Author
Listed:
- Bruce Mutume
(Hydraulic Barrier Material and Geomimicry Laboratory, School of Chemical Engineering, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA)
- Ali Ettehadi
(Hydraulic Barrier Material and Geomimicry Laboratory, School of Chemical Engineering, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA)
- B. Dulani Dhanapala
(ATRC Imaging Suite, College of Engineering, Architecture, and Technology, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA)
- Terry Palisch
(CARBO Ceramics Inc., 5050 Westway Park Blvd, Houston, TX 77041, USA)
- Mileva Radonjic
(Hydraulic Barrier Material and Geomimicry Laboratory, School of Chemical Engineering, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA)
AbstractEnhanced Geothermal Systems (EGS) require thermochemically stable proppant materials capable of sustaining fracture conductivity under harsh subsurface conditions. This study systematically investigates the response of commercial proppants to coupled thermo-hydro-chemical (THC) effects, focusing on chemical stability and microstructural evolution. Four proppant types were evaluated: an ultra-low-density ceramic (ULD), a resin-coated sand (RCS), and two quartz-based silica sands. Experiments were conducted under simulated EGS conditions at 130 °C with daily thermal cycling over a 25-day period, using diluted site-specific Utah FORGE geothermal fluids. Static batch reactions were followed by comprehensive multi-modal characterization, including scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), and micro-computed tomography (micro-CT). Proppants were tested in both granular and powdered forms to evaluate surface area effects and potential long-term reactivity. Results indicate that ULD proppants experienced notable resin degradation and secondary mineral precipitation within internal pore networks, evidenced by a 30.4% reduction in intragranular porosity (from CT analysis) and diminished amorphous peaks in the XRD spectra. RCS proppants exhibited a significant loss of surface carbon content from 72.98% to 53.05%, consistent with resin breakdown observed via SEM imaging. While the quartz-based sand proppants remained morphologically intact at the macro-scale, SEM-EDS revealed localized surface alteration and mineral precipitation. The brown sand proppant, in particular, showed the most extensive surface precipitation, with a 15.2% increase in newly detected mineral phases. These findings advance understanding of proppant–fluid interactions under low-temperature EGS conditions and underscore the importance of selecting proppants based on thermo-chemical compatibility. The results also highlight the need for continued development of chemically resilient proppant formulations tailored for long-term geothermal applications.
Suggested Citation
Bruce Mutume & Ali Ettehadi & B. Dulani Dhanapala & Terry Palisch & Mileva Radonjic, 2025.
"Multiscale Characterization of Thermo-Hydro-Chemical Interactions Between Proppants and Fluids in Low-Temperature EGS Conditions,"
Energies, MDPI, vol. 18(15), pages 1-24, July.
Handle:
RePEc:gam:jeners:v:18:y:2025:i:15:p:3974-:d:1709777
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:18:y:2025:i:15:p:3974-:d:1709777. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.