Meine Sprache
Meine Währung
Hilfe
BestellenProbleme beim BestellenHäufig gestellte FragenKontaktiere unsKontaktiere uns (Lieferanten)Über JunoJuno DailyNeuerscheinungen dieser WocheDJ & Studio StoreTagsFeedbackDatenschutzregelungReturns & refundsAGBFinanceJuno Vinyl DistributionJuno Vinyl WholesaleJuno Marketing and PR departmentPromote your label / releases
Tobinski LFOs Module IN KÜRZE
Fast, safe, international shipping.
Click 'email me when available'.By Tobinski
Delivery
Despatched as soon as released
Features
Specs
Returns & refunds
Finance
- Two independent LFOs: Electric Druid TAPLFO3C and VCLFO10-based.
- Sync clock input (TAPLFO3C) and reset pulse input (LFO10), including S&H functionality.
- 16 selectable waveforms per LFO, split into two banks of 8.
- Frequency control with both freeform setting or multiplier/divider.
- Waveform skew, control for asymmetry.
- Switchable wave shape smoothing.
- Level control of output amplitude.
- Dual CV inputs per LFO with attenuators and destination selection.
- Cross-modulation via normalled CV routing between LFOs.
| Module Type | Low Frequency Oscillator (LFO) |
If you decide an product is not suitable within 14 days of delivery, you can return it to us for a replacement or refund. Returns must be unused and in their original, undamaged packaging.
Some items are excluded from our money back guarantee:
- Computer software that has been unsealed or registered
- Any item that comes directly into contact with the nose, ears or mouth
To arrange a return, just contact our customer service department on 020 7424 2800 or via our customer support form.
Tobinski LFOs Module
The Dual LFO Module from Tobinski combines two low-frequency oscillators, each based on Electric Druid technology: the TapLFO3C and the LFO10. This module provides a wealth of modulation possibilities, with flexible synchronization, waveform shaping, and dynamic CV control to suit any Eurorack setup.
The TapLFO3C (left side of the module), syncs to an incoming pulse, allowing precise alignment with external clocks or rhythmic triggers. Its built-in frequency multiplier / divider further extends its range, enabling intricate timing patterns. The output can also be set to +-5v bipolar or 0v to 10v unipolar.
The LFO10-based LFO, on the other hand, resets to an incoming pulse, ensuring repeatable, synchronized modulation. The output can also be set to sample and hold mode allowing the LFO waveform to act as the signal to be sampled and the reset pulse to act as the sample trigger.
Each LFO features 16 selectable waveforms split into two banks of eight, accessible via manual switches.
Power consumption: 40mA at +12V and 45mA at -12V and 11mA at +5V
Depth: 27mm
12 HP
The TapLFO3C (left side of the module), syncs to an incoming pulse, allowing precise alignment with external clocks or rhythmic triggers. Its built-in frequency multiplier / divider further extends its range, enabling intricate timing patterns. The output can also be set to +-5v bipolar or 0v to 10v unipolar.
The LFO10-based LFO, on the other hand, resets to an incoming pulse, ensuring repeatable, synchronized modulation. The output can also be set to sample and hold mode allowing the LFO waveform to act as the signal to be sampled and the reset pulse to act as the sample trigger.
Each LFO features 16 selectable waveforms split into two banks of eight, accessible via manual switches.
Power consumption: 40mA at +12V and 45mA at -12V and 11mA at +5V
Depth: 27mm
12 HP
Read moreRead less
Specifications
| Module Type | Low Frequency Oscillator (LFO) |
Tobinski LFOs Module IN KÜRZE
Fast, safe, international shipping.
Click 'email me when available'.By Tobinski
£237.50
(No payment required now - pay when released)